Effect of iron on mineral composition of quaternary phase clinker and its hydration properties

Journal of Thermal Analysis and Calorimetry - The present task is to investigate the influence of iron on the mineral composition and microstructure of the phase Q (C20A13M3S3, in the text below...     

Comparative pharmacokinetic study of four major bioactive components after oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and corticosterone‐induced depressive rats

A highly selective and efficient LC–MS/MS method was developed to determine the plasma concentration of magnolol, hesperidin, neohesperidin and geniposide following oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and depressed rats. Plasma samples were pretreated by protein precipitation with methanol. Chromatographic separation was performed on an XTerra^® MS C₁₈ column using a gradient elution with a mobile phase composed of acetonitrile–0.1% aqueous formic acid. The proposed method was validated to be specific, accurate and precise for the analytes determination in plasma samples. The calibration curves displayed good linearity over definite concentration ranges for the analytes. The intra‐ and inter‐day precision of the proposed method at three different levels were all within <11.13% and the relative errors ranged from ?8.46 to 8.93%. The recovery of the four compounds ranged from 82.72 to 89.08% and no apparent matrix effect was observed during sample analysis. After full validation, the established method was successfully applied for comparing the pharmacokinetics of four components between normal and depressed rats. The results showed that the AUC and C_max of four analytes in depressed rats were significantly different from those in normal rats and might provide helpful information to guide the clinical use of Zhi‐Zi‐Hou‐Po to treat depression.     

Large‐Area Aminated‐Graphdiyne Thin Films for Direct Methanol Fuel Cells

A two‐dimensional (2D) carbon nanofilm with uniform artificial nanopores is an ideal material to ultimately suppress the fuel permeation in the proton exchange membrane fuel cells. Graphdiyne has great mechanical strength, high dimensional stability, and controllable nanopores, and has good prospects to play this crucial role. It is found that graphdiyne nanofilm with amino groups and natural nanopores can be easily prepared with high integrity. The aminated graphdiyne has good compatibility with the Nafion matrix owing to the acid–base interaction between them. The excellent comprehensive properties of graphdiyne in selectivity, dimensional stability, and integrity effectively improve the power performance and stability of fuel cells at wide temperature. Our results can be developed into a universal method that can easily realize the selective separation of ions and small molecules, and open a new way for the emerging applications in green energy.     

Metabolomic analysis of raw Pinelliae Rhizoma and its alum‐processed products via UPLC–MS and their cytotoxicity

Alum‐processing is a traditional method to attenuate the toxicity of Pinelliae Rhizoma (tubers of Pinellia ternate, PT). The present study aimed at investigating the chemical and cytotoxic changes during alum processing. Metabolomic profiles of raw and alum‐processed PT were studied based on ultra‐performance liquid chromatography coupled with Orbitrap mass spectrometry. More than 80 chemicals in positive MS mode and 40 chemicals in negative MS mode, such as organic acids, amino acids, glucosides and nucleosides, were identified after multivariate statistical analysis, including principal component analysis and orthogonal partial least‐square discriminant analysis. Almost all of the identified chemical markers were significantly decreased ~10‐ to 100‐fold after alum processing. Meanwhile, the correlations between the chemical markers were assimilated to a positive coefficient from disorderly distribution during the processing. Raw PT extracts could inhibit the proliferation of human carcinoma cells (HCT‐116, HepG2, and A549) at the rate of 40.5, 24.8 and 31.6% more strongly than processed PT. It was concluded that the alum processing of PT could decrease the number of actively water‐soluble principles at the same time as decreasing toxicity. Given the water‐insoluble property of toxic calcium oxalate raphides in PT, we suggest that a more scientific processing method should be sought.     

Synthesis,characterization, photophysical,and redox properties of three trinuclear Ru(II) polypyridyl complexes possessing 5-amino-1,10-phenanthroline ligands

Three ruthenium(II) polypyridyl complexes with 5-amino-1,10-phenanthroline ligands have been successfully designed and synthesized. They have been fully characterized by ESI-MS, ESI-HRMS, ¹H NMR, and elemental analyses. The photophysical and electrochemical properties of the three complexes have been investigated in organic solvent. The geometrical configuration and the electron density distribution in the frontier molecular orbitals of the three complexes have been studied. The three complexes show metal-to-ligand charge transfer (¹MLCT) absorption at 445 nm, and intense triplet metal-to-ligand (³MLCT) emission at around 619 nm in fluid solution at 298 K and 580 nm in low-temperature glass. Electrochemical studies of the three complexes are consistent with one Ru^III/II reversible couple at around 1.31 V accompanied by three ligand-centered reduction couples.

     

Non-isothermal thermogravimetric analysis of pyrolysis kinetics of four oil shales using Sestak–Berggren method

Journal of Thermal Analysis and Calorimetry - In this study, the non-isothermal pyrolysis method was used to investigate the pyrolysis characteristics of oil shale from four areas: namely Nongan,...     

Probing nanocolumnar silver nanoparticle/zinc oxide hierarchical assemblies with advanced surface plasmon resonance and their enhanced photocatalytic performance for formaldehyde removal

Recent advances in photocatalysis focus on the development of materials with hierarchical structure and on the surface plasmon resonance (SPR) phenomenon exhibited by metal nanoparticles (NPs). In this work, both are combined in a material where size‐controllable Ag‐NPs are uniformly loaded onto the hierarchical microporous and mesoporous and nanocolumnar structures of ZnO, resulting in Ag‐NP/ZnO nanocomposites. The embedded Ag‐NPs slightly decrease the hydrophobicity of fibrous ZnO, improve its wettability, and increase the absorption of formaldehyde (H₂CO) onto the photocatalyst, all of this resulting in excellent photodegradation of formaldehyde in aqueous solution. Besides, we found that Ag‐NPs with optimal size not only accelerate the charge transfer to the surface of ZnO, but also strengthen the SPR effect in the intercolumnar channels of fibrous ZnO particles combining with high concentration of photo‐generated radical species. The micro‐to‐mesoporous ZnO is like a nanoarray packed Ag‐NPs. With Ag‐NPs of diameter 2.5 < ? < 6.5 nm, ZnO exhibits the most superior photodegradation rate constant value of 0.0239 min^?1 with total formaldehyde removal of 97%. This work presents a new feasible approach involving highly sophisticated Ag‐NP/ZnO architecture combining the SPR effect and hierarchically ordered structures, which results in high photocatalytic activity for formaldehyde photodegradation.     

Porous Molybdenum Carbide Nanostructures Synthesized on Carbon Cloth by CVD for Efficient Hydrogen Production

Molybdenum carbide (Mo₂C) is a promising noble-metal-free electrocatalyst for the hydrogen evolution reaction (HER), due to its structural and electronic merits, such as high conductivity, metallic band states and wide pH applicability. Here, a simple CVD process was developed for synthesis of a Mo₂C on carbon cloth (Mo₂C@CC) electrode with carbon cloth as carbon source and MoO₃ as the Mo precursor. XRD, Raman, XPS and SEM results of Mo₂C@CC with different amounts of MoO₃ and growth temperatures suggested a two-step synthetic mechanism, and porous Mo₂C nanostructures were obtained on carbon cloth with 50 mg MoO₃ at 850 °C (Mo₂C-850(50)). With the merits of unique porous nanostructures, a low overpotential of 72 mV at current density of 10 mA cm⁻² and a small Tafel slope of 52.8 mV dec⁻¹ was achieved for Mo₂C-850(50) in 1.0 m KOH. The dual role of carbon cloth as electrode and carbon source resulted into intimate adhesion of Mo₂C on carbon cloth, offering fast electron transfer at the interface. Cyclic voltammetry measurements for 5000 cycles revealed that Mo₂C@CC had excellent electrochemical stability. This work provides a novel strategy for synthesizing Mo₂C and other efficient carbide electrocatalysts for HER and other applications, such as supercapacitors and lithium-ion batteries.